Using Snap-On Cable - CipherLab 9200 Reference Manual

9200 Mobile Computer Reference Manual

USING SNAP-ON CABLE

Fasten the Snap-on Charging and Communication Cable to the lower end of the
1.
mobile computer.
Insert the adapter DC plug into the power jack on the Snap-on Cable.
2.
Connect one end of the power cord to the adaptor, and the other end to an
3.
electrical outlet. (Use power cord suitable for your country.)
The charging LED (left) on the mobile computer lights red while charging. The LED
will turn green when charging is completed.
If necessary, connect the USB/RS-232 end of the cable to your PC for data
4.
transmission.
Note: You may connect the Snap-on Cable to your PC for simultaneous data
communication and charging.
9200 LED Indicator
Charging
10
Status
Red, solid
Green, solid
Description
Charging the mobile computer
Charging complete