CipherLab 9200 Reference Manual page 99

Windows embedded handheld 6.5 computer
Table of Contents

Advertisement

9200 Mobile Computer Reference Manual
DFS Channels
DFS Scan Time
Ad Hoc Channel
Aggressive Scan
CCX features
WMM
84
Full
1, 6, 11
1, 7, 13
Custom
Default: Full
Indicates whether to support 5 GHz (802.11a) channels where dynamic
frequency selection (DFS) is required.
Value: On, Off
Default: Off
Enables determining the dwell (listen) time when passively scanning on a
DFS channel.
Valid range of 20-500 ms configurable
Default: 120
When the DFS Scan Time is changed to a value lower than default, it is
recommended that the beacon period in the WLAN infrastructure is
changed as well. Ideally, the dwell time should be 1.5 times than that
of the beacon period.
The channel to be used for an ad hoc connection if the active profile has a
Radio Mode value of "Ad Hoc".
Value:
1~14
36, 40, 44, 48
Default: 1
If a channel that is not supported is selected, then SCU will
automatically apply the default channel setting (1).
Aggressive scanning complements and works in conjunction with the
standard scanning that is configured through the Roam Trigger, Roam
Delta, and Roam Period settings. It is recommended that aggressive
scanning is enabled unless there is significant co-channel interference
because of overlapping coverage from APs that are on the same channel.
Value: On, Off
Default: On
Whether to allow the use of Cisco information element (IE) and CCX
version number to authorize support for CCX features.
Value: Full, Off
Full mode uses Cisco IE and CCX version number and enables support for
all CCX features. Off mode disables all support for Cisco IE and CCX
version number.
Default: N/A
If the radio fails to connect to an 802.11n wireless network, set CCX
features as "Off" and try again.
Whether to allow the use of Wi-Fi Multimedia (WMM) Extensions or not.
Value: On, Off
Default: Off
All channels
The most commonly used 2.4 GHz channels
For ETSI and TELEC radios only
Indicates the system registry has been
edited to include a value other than those
available in the drop-down value
One of the 2.4 GHz channels
UNII-1 channels

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

9200c

Table of Contents