CipherLab 9200 Reference Manual page 101

9200 Mobile Computer Reference Manual
LED
Tray Icon
Admin Password
Auth Timeout (s)
Certs path
Supplicant
Auto Profile
86
Indicates whether or not an LED is used.
Value: On, Off
Default: Off
Whether to enable the system tray icon or not.
Value: On, Off
Default: On
N/A
Specifies how long it will wait for an EAP authentication request to succeed
or fail. If authentication credentials are specified in the active profile and
the authentication times out, then association will fail. If authentication
credentials are not specified in the active profile and the authentication
times out, then the user will be required to enter credentials again.
Value: 3 ~ 60
Default: 8 (seconds)
File path where the certificate for EAP authentication is stored.
Value: A valid directory path of up to 64 characters
Default: Depends on device
The user (client) making a request to gain access to system resources
through the authentication server.
Value: Summit, Third Party
Default: Summit
Activate or deactivate automatic profile selection.
Value: On, Off
Default: Off
When On is selected, proceed to the Profile settings page and select from
the existing profiles those which you would like to add to the Auto Profile
list. The number of profiles in this list is limited to 19.
When Auto Profile is activated, the Summit radio will attempt to associate
to an access point after a device startup or resume, and it will try out each
listed profile in order until the radio associates to an access point. The
successful profile becomes the active profile and remains active until one
of the following occurs:
The device goes through suspension and resume, power-cycling, or
restart, which causes the radio to go through the automatic profile
selection process once more.
Auto Profile is turned off and an active profile is manually selected on
the SCU Configuration tab.