Rfid Reader - CipherLab 9200 Reference Manual

7.2.2. RFID READER

When an RFID reader is detected, the RFID Reader option is available on General tab
of the reader settings page. The RFID Reader check box is selected by default. Deselect
it to disable the RFID reader on the mobile computer. This is occasionally needed when
you only want to read printed barcodes, lest RFID tags are read and decoded.
To access RFID reader settings:
Open Reader Configuration as described in
1.
Tap RFID on General tabbed page.
2.
READ BLOCKS SETTINGS
Setting
Read blocks
Login Key
Turn off RFID when
device suspend
Start position
Reading length
(byte)
Descriptions
Reads data from an RFID tag.
Shows what key A and key B currently is.
Keys A and B are what the RFID reader module
relies on to access (read or write) an RFID tag. In
default state, both keys are a sequence of twelve
"F" characters because they are Mifare tag's factory
default. Modify these default keys if necessary.
Select this to turn off RFID function when the mobile
computer enters
computer is resumed from suspension, RFID function
will be automatically restored.
Defines where to start reading data from.
See Appendix V:
Defines how many bytes of data to read.
Chapter 7 Using Reader Configuration Utility
Launch Reader
suspension. Once
RFID Tag Default Block.
Configuration.
Default
Selected
Key A &
FFFFFFFFFFFF
Deselected
the mobile
-1
block, byte 0)
100
(default
137