Device Lock - CipherLab 9200 Reference Manual

2.1.5. DEVICE LOCK

By default, the device is unlocked. You may lock the mobile computer to prevent
unintended operation. When locked, it will not respond to screen touch or keypad input
until it is unlocked again. However, on the Lock screen you can still monitor the device
status on the title bar. If the Lock screen is enabled, the Volume adjustment keys on the
left side will be unavailable.
Lock 9200
Open Start Screen, and tap the lock icon
computer.
Password Lock
You may further apply password protection to block unauthorized access. Go to Start
Screen | Settings, and tap Lock.
Simple PIN: Set up a password (4-digit at least)
Strong alphanumeric: Set up a strong password (7-character at least)
Unlock 9200
Drag the lock slide to left or right of the unlock screen.
Note: For the Simple PIN password to Lock screen, the password can not be a sequence
of numerals (e.g. 1111 or 1234), and cannot contain uppercase/lowercase letters
or punctuation.
Tap to lock device.
Chapter 2 Learning Windows Embedded Handheld Basics
on the softkey bar to protect your mobile
Device is locked
39