Chapter 2 - Installation; Installing The Battery Pack; Figure 4: Installing The Battery Pack - CipherLab 8000 Series Reference Manual

Hide thumbs Also See for 8000 Series:

Table of Contents

H A P T E R

Installation

The mobile computer is designed for portable use, and it almost requires no installation

except installing the rechargeable battery pack (or the alkaline batteries for Model

8000/8020).

Warning:

Always prepare a spare battery pack, especially when you are on the road. To save power,

turn off the backlight when you are working in a bright work area.

1. Hold the mobile computer face down in one hand.

2. Press the battery lid release and slide the battery lid.

3. Remove the battery lid by the other hand.

4. Slide the battery pack into the battery compartment at a proper angle (30°~45°) so that

the contacts of the battery are pressed onto the protruding contacts inside the

compartment. Make sure that the battery is snugly fit into the compartment.

5. Replace the battery lid and lock it firmly.

Note: For a new battery, make sure it is fully charged before use.

Read

Important Safety Precautions

before installation.

Table of Contents

Need help?

Do you have a question about the 8000 Series and is the answer not in the manual?

8020 8021 8061 8071 8001