Activesync Via Bluetooth - CipherLab 9200 Reference Manual

5.6. ACTIVESYNC VIA BLUETOOTH

To use Bluetooth via ActiveSync, first configure Bluetooth settings correctly on your
computer first.
Configure Bluetooth settings for your computer, such as "Turn discovery on" and
1.
add a COM port (incoming), the COM port value depending on your computer.
Pair the mobile computer with the remote computer via Bluetooth as described in
2.
Pair Devices.
For Bluetooth connection to work via ActiveSync, either disconnect physically by
3.
detaching the mobile computer from the Snap-on Cable or Cradle, or uncheck the
"Allow USB connections" option under ActiveSync | File | Connection Settings.
In addition, enable COM port connection and specify the correct COM port.
Chapter 5 Using Bluetooth
109