Lubricating The Steering Head Bearing; Removing Front Fender - Husqvarna FE 501s 2023 Owner's Manual

12.13

Lubricating the steering head bearing

12.14

Removing front fender

SERVICE WORK ON THE CHASSIS 12
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated
in the course of removal and installation of the lower
triple clamp.
H02387-01
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Remove screws
H03690-10
( p. 56)
( p. 57)
1
.
2
. Take off the front fender.
p. 110)
61