Reducing Dust From Cutting Rolls - Canon TX-2000 Online Manual

Reducing Dust from Cutting Rolls

If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the touch screen menu, which will coat the leading and trailing edges of the
printed document with ink. As a result, you can reduce problems with the print head. You can set Cut-dust
reduction according to the media type.
Important
• Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight
paper. If not cut properly, the paper may jam.
• Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless
printing, set Cut-dust reduction to OFF.
Follow these steps to set Cut-dust reduction to ON.
1. Tap paper settings display area on Home screen of touch screen.
Note
• If the Home screen does not appear, tap the HOME button.
2. Tap or
3. Tap Paper settings.
4. Tap Advanced.
area.
99