Canon TX-2000 Online Manual page 262

The result varies depending on the selected item.
◦ When OFF is selected:
The maximum roll paper width is applied as the width of printed area, and the 1.5 times of the
maximum roll paper width is applied as the length of it. The paper cut position is specified outside
of the printed area.
◦ When Command priority is selected:
The minimum image area is applied as the printed area.
The result is the same when you select Detected size.
See "When Detected size is selected:".
◦ When Detected size is selected:
The minimum image range including images is detected based on image data in HP-GL2 data.
In addition, if the image drawing range is not specified by Command priority , the minimum
image range including images is detected, as the area cannot be specified.
The figure below shows the printing image.
B. Graphic data range
C. Paper cut position
262