Turning The Printer Off - Canon TX-2000 Online Manual

The printer will not enter standby mode in the following situations. Take action as necessary.
• The top cover is open
Close the top cover.
• The ink tank cover is open
Close the ink tank cover.
• The print head is not installed
Replacing the Print Head
• The ink tank is not installed
Replacing Ink Tanks
• Error appears on touch screen
Check the message on the touch screen and take action as necessary.
• The ON button and Status lamp never light up, and nothing appears on the touch screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical
outlet.
• No paper is loaded
Load paper. (See

Turning the printer off

Important
• Never disconnect the printer's power supply or unplug it during a print job. This may damage the
printer.
1. Make sure no print jobs are in progress.
While the Status lamp is flashing, the printer is running. The color of the lamp indicates the following
states.
"Loading and Printing on Rolls.") (See "Loading and Printing on
558
Sheets.")