Canon TX-2000 Online Manual page 261

DETECT IMAGE SIZE EXAMPLE
A. Image drawing range specified by the command
B. Graphic data range
Though the image drawing range is specified for this kind of drawing image above, the part of the image
may be cut off if you do not specify the image drawing range.
Select Detected size if the image drawing range is not specified.
This section describes settings both when the image drawing range is specified and not specified.
• When the image drawing range is specified:
When OFF (Initial setting) or Command priority is selected:
When the image drawing range is specified, printing area is specified based on the setting. The origin
is specified on the upper left of the paper.
The figure below shows the printing image.
A. Image drawing range specified by the command
C. Paper cut position
If you select Detected size, the graphic data is detected for printing without using the specified image
drawing range. See "When Detected size is selected:" on "When the image drawing range is not
specified:".
• When the image drawing range is not specified:
261