Canon TX-2000 Online Manual page 601

Is the width of paper roll 1 different from the
Condi-
width of paper roll 2?
tion 7
*1 If Auto (Use Printer Settings) is selected for Media Type in the Main sheet, the media type set in the
printer is recognized as being consistent with the media type specified in the print job.
*2 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is
selected.
• When the printer has switched to sleep mode and has returned to the initial position
• When the printer has been turned on
• When cut paper has been fed into the printer and has exited it
width of both paper roll 1 and pa-
per roll 2
Roll width is different
Roll width is the same
601
Select the paper
roll whose width is
closer to the width
specified for the
print job
Select the paper
roll currently being
fed into the platen
*2