Canon TX-2000 Online Manual page 688

5. Complete the setup
Click OK to return to the Layout tab.
The registered title appears in the Stamp list.
Changing and Registering Some of Stamp Settings
1. Select stamp
On the Layout tab, select the Stamp check box, and click Define Stamp....
The Define Stamp dialog box opens.
2. Select the stamp for which the settings are to be changed
From Watermark List, select the title of the stamp you want to change the settings for.
3. Configure each setting while viewing the preview
4. Complete the setup
Click OK to return to the Layout tab.
The registered title appears in the Stamp list.
Note
• The stamp registered as the default setting cannot be changed.
Deleting an Unnecessary Stamp
1. Select stamp
On the Layout tab, select the Stamp check box, and click Define Stamp....
The Define Stamp dialog box opens.
2. Select the stamp to be deleted
Select the title that you wish to delete from the Watermark List and click Delete.
Click Yes when the confirmation message appears.
3. Complete the setup
Click OK to return to the Layout tab.
Note
• The stamp registered as the default setting cannot be deleted.
688