Canon TX-2000 Online Manual page 870

Low Print Quality setting causing lines in the printing
Check 7
Follow the steps below to set Print Quality to High, and then print.
• Windows
Change the Print Quality settings in the printer driver Advanced Settings.
Changing the Print Quality and Correcting Image Data
• macOS
Change the Print Quality in the printer driver Quality & Media settings.
Changing the Print Quality and Correcting Image Data (macOS)
When Fast or Standard is selected, the printing time is shorter and less ink is used than with Highest or High,
but the print quality is reduced.
Is the media type specified in the printer driver the same as the media type
Check 8
loaded in the printer?
Load paper of the same type as you have specified in the printer driver.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Loading Sheets in the Printer
Follow the steps below to change the printer driver settings.
1. To stop printing, press the Stop button.
2. Change the type of paper in the printer driver and try printing again.
Make sure that lines are not printed around 100 mm from the paper edges.
Check 9
If the printer is on standby or if you leave paper as it is for approximately over 30 minutes, paper may be curled
or wrinkled.
Set Sleep timer on Energy saving settings to a value shorter than 30 minutes, so that you can prevent paper
from being curled or wrinkled.
Device user settings
(Windows)
870