Canon TX-2000 Online Manual page 724

◦ When printing with the Enable advanced printing features turned off in the Advanced tab in the
printer's Properties
◦ When printing with Print directly to the printer enabled in the Advanced tab in printer's
Properties
◦ When printing after the printing port in the Ports tab in the printer's Properties has changed to
FILE:
◦ When printing after choosing Output to file in the Print dialog box in the application software
• If you perform a point-and-print installation, you will not be able to use the Free Layout and the Edit
Using PosterArtist features of Page Layout in the Layout tab as well as the Canon
imagePROGRAF Preview feature.
• If you print after setting Free Layout and Edit Using PosterArtist, refrain from printing from other
drivers.
• If you combine specific Print Quality with large paper sizes, you may not be able to correctly print
stamps and borders.
• In the Canon imagePROGRAF Preview, characters and fine lines visualized in the View screen may
look differ from printed results. In such cases, try choosing the Layout tab, opening the Special
Settings dialog and turning on Preview Switching.
• If you are using a model supporting Automatically switch paper sources (paper size priority) in
the Device Settings tab, or if you have chosen Automatically switch paper sources (paper size
priority), you may not be able to get the desired printing results.
In such cases, uncheck Automatically switch paper sources (paper size priority).
Points to Note About Applications with Restrictions
• If, in Microsoft Excel, you tick Collate and then you print more than one copy, or if you do Entire
workbook after configuring different settings in each tab, you may not be able to perform layout
printing nor to get the intended printing results.
• If you try to print data on a very large-size paper through applications like Adobe Illustrator, you may
not be able to print.
In such cases, try printing after following the procedure indicated below.
◦ Open the Main tab and uncheck Preview before printing.
◦ If you are using a 32-bit driver, open the Layout tab and click Special Settings.
Turn off Fast Graphic Process.
◦ Increase the virtual memory of your operating system.
◦ If you are using Adobe Illustrator, turn off/on Bitmap printing in the Print dialog box.
• In the cases described below, you will not be able to use the Free Layout and the Edit Using
PosterArtist features of Page Layout in the Layout tab.
◦ When printing from application software which do not allow EMF spooling, like Adobe Photoshop
LE, MS Photo Editor, Ace Draw and others.
• When printing from Adobe Photoshop, tone jumps may occur in the gradation of black and white
photographs.
• When printing data created with Microsoft Word using Enlarged/Reduced Printing or Borderless
Printing, you may not be able to print correctly.
In such cases, try printing after following the procedure indicated below.
724