Canon TX-2000 Online Manual page 379

1. Network Type:
Select the wireless LAN mode.
Infrastructure
Connects the printer to the wireless LAN with a wireless router.
Direct
Connects the printer to wireless communication devices (smartphone or tablet) without a
wireless router.
Note
• If Direct is selected, the Search... button is displayed in a gray out status.
In addition, you cannot connect to Internet from your computer depending on your
operating environment.
2. SSID:
The network identifier (SSID) of the wireless LAN currently used is displayed.
The identifier for Wireless Direct (SSID) appears while in Wireless Direct.
3. Search...
The Detected Wireless Routers screen is displayed to select a wireless router to connect to.
For a wireless router already connected to the computer, Available is displayed on
Communication Status.
If you select a wireless router with Not Connected on Communication Status from the list,
clicking Set displays the WPA/WPA2 or WEP setting screen for a wireless router.
If WEP Details Screen Appears
If WPA/WPA2 Details Screen Appears
4. Encryption Type:
Displays the encryption method used over the wireless LAN.
379