Canon TX-2000 Online Manual page 849

Make sure wireless LAN is enabled on your device.
For details, refer to your device's instruction manual.
Make sure printer is selected as connection for device (e.g. smartphone or
Check4
tablet).
Select the identifier for Wireless Direct (SSID) specified for the printer as the connection destination for
devices.
Check the destination on your device.
For details, refer to your device's instruction manual or visit the manufacturer's website.
To check the identifier for wireless direct (SSID) specified for the printer, display it using the operation panel of
the printer or print out the network setting information of the printer.
• Display on the touch screen.
LAN settings
• Print the network settings.
Printing Network Settings
Have you entered the proper password specified for the Wireless Direct?
Check5
To check the password specified for the printer, display it using the operation panel of the printer or print out
the network setting information of the printer.
• Display on the touch screen.
LAN settings
• Print the network settings.
Printing Network Settings
Make sure the printer is not placed too far away from the device.
Check6
If the distance between the printer and device is too far, wireless communication becomes poor. Place the
printer and device close to each other.
Make sure 5 devices are already connected.
Check7
Wireless Direct does not allow more than 5 devices to be connected.
Cannot Communicate with Printer via Wired LAN
Make sure the printer is turned on.
Check1
Make sure the LAN cable is connected properly.
Check2
Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the
cable properly.
849