Adjusting Line Misalignment - Canon TX-2000 Online Manual

Adjusting Line Misalignment

If printed lines are misaligned, execute Print head angle adjustment to adjust the print head angle. Print
head angle adjustment requires you to examine a printed test pattern and adjust the angle using the angle
adjustment lever.
Always adjust the print head angle after replacing the print head.
Note
• We recommend using the type of paper you use most often for adjustment.
Paper to Prepare
When using rolls
An unused roll at least 10.00 inches (254.0 mm) wide
When using sheets
One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1. Load paper.
Loading Rolls on the Roll Holder
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified on the printer.
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2. Tap Maintenance on HOME screen.
Touch Screen
The Maintenance screen appears.
3. Tap Print head angle adjustment.
A confirmation message appears.
4. Tap Yes.
The carriage moves and the guidance for the print head angle adjustment procedure appears on the
touch screen.
5. Open the top cover.
427