Reflect Roll Unit Settings In The Printer Driver - Canon TX-2000 Online Manual

Reflect Roll Unit Settings in the Printer Driver

Reflect printer unit's Roll Unit settings in the printer driver.
If the printer unit settings are reflected in the printer driver, the paper that can be set in the printer driver
settings will change to a status suitable to the printer unit status.
The following explains the procedure to reflect Roll Unit settings in the printer driver.
1. Select as described below:
• If you are using Windows 10 or Windows Server 2016, select the Start menu -> Windows
System -> Control Panel -> Hardware and Sound (Hardware) -> Devices and Printers.
The Devices and Printers window is displayed.
• If you are using Windows 8.1, Windows Server 2012 R2, or Windows Server 2012, from the
Desktop charms, select Settings -> Control Panel -> Hardware and Sound (Hardware) ->
Devices and Printers.
The Devices and Printers window is displayed.
• If you are using Windows 7 or Windows Server 2008 R2, select the Start menu -> Control
Panel -> Hardware and Sound (Hardware) -> Devices and Printers.
The Devices and Printers window is displayed.
2. Display setup window
Right-click the "Your model name" icon, and select Printer properties.
The printer's Properties window appears.
3. Click the Device Settings tab's Device Information
Click Acquire Status in the displayed Device Information dialog box, and then click Yes.
Printer unit settings will be reflected in the printer driver.
Important
• In the event the lower roll unit is not set or the roll unit is being used as a wrapping device, the value
of Roll Unit will be set to No. In this case, Automatically switch paper sources (paper size
priority) will be grayed out and cannot be selected. Also, the Paper Source items that can be
selected in the Page Setup tab will change.
602