Canon TX-2000 Online Manual page 123

Stacking Printed Materials with a 36-inch Width, of A1 Landscape, with a 24-
inch Width, or of A2 Landscape (Position 4)
This is the position when you stack the printed materials with a 36-inch width, of A1 landscape, with a 24-
inch width, or of A2 landscape.
• Paper orientation
Landscape
• Supported paper size
◦ 24"x36" (ARCH D) 24.00 x 36.00 inches (609.6 x 914.4 mm)
◦ 18"x24" (ARCH C) 18.00 x 24.00 inches (457.2 x 609.6 mm)
◦ A1 23.39 x 33.11 inches (594.0 x 841.0 mm)
◦ A2 16.54 x 23.39 inches (420.0 x 594.0 mm)
Pull down the rod (fixed) (C) toward you. Set the rod (adjustable) in the groove (B) at the upper of the
stand, and then set the flapper (A) horizontally so that the stacker configuration is the Position 4.
123