Troubleshooting; Frequently Asked Questions - Canon TX-2000 Online Manual

Troubleshooting

Frequently Asked Questions

I want to easily create vertical or horizontal banners.
Does this printer support sub-ink tank system?
I want to know how to configure roll cutting.
I want to configure so that the roll is cut automatically after waiting for the ink to dry.
How do I print without borders?
I want to know the paper types that can be used in this printer.
The paper type that I want to print is not displayed on the Touch Screen.
Can I perform duplex printing?
I want to perform enlargement printing.
Printer Connection Methods
Examples of Problems
Problems Regarding Paper
Clearing Jammed Roll Paper
Clearing a Jammed Sheet
Roll paper cannot be inserted into the Paper Feed Slot
Paper is not fed automatically
Roll Paper Is not Switched Automatically
Roll Pater Is not Fed Automatically
Paper Source Does Not Switch When Roll Paper Is Used Up
Roll Paper Remains/Lacks under Quantity Management
Cannot load sheets
Paper is not cut straight
Paper is not cut
Cutter Blade Does Not Work While Cutting Is in Progress
The size of clear film cannot be detected
Margins are wide
When printing on roll paper, the printed surface becomes scratched
Printing Does Not Start
Printer Suddenly Stopped Working for Some Reason
The Data lamp on the Operation Panel does not light up
The printer does not respond even if print jobs are sent
"Preparing the ink system." is displayed
"Agitating the ink" is displayed
The Printer Stops During a Print Job
Printing stops and an error message is displayed
The printer ejects blank, unprinted paper
805