Connection Method - Canon TX-2000 Online Manual

Available
Indicates the printer is available.
Setup Completed
Appears after performing network setup and clicking Set to close the window.
Not Connected
Indicates the printer is required to perform wireless LAN setup.
Performing/Changing Wireless LAN Settings
Not Set
Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or
enable IPv6 on Network Settings....
Performing/Changing Wireless LAN Settings
IP Address Overlap
Indicates the IP address is duplicated to another printer.
Unknown
Indicates the printer recognized as Available in the past cannot be used currently.
Note
• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.
4. IP Address
Displays the printer IP address. Nothing is displayed if the printer status is Not Connected.
Note
• If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface
(wireless/wired LAN) disabled on the printer setting.
5. Location
Displays the printer location if it is registered. Nothing is displayed if the printer status is Not
Connected.
Note
• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.
Assigning Printer Information

6. Connection Method

Displays printer connection method (wired or wireless LAN).
Note
• If USB is selected from the pulldown menu on the toolbar, either of the LAN connection method
(wired or wireless) available for the printer is displayed.
• If the printer supports both of the LAN connection methods, the printer is recognized as two
printers and they are displayed separately.
• If the printer does not support wired LAN, wired LAN is not displayed.
370