Warning Display - Canon TX-2000 Online Manual

Warning display

Displays HP-GL/2 warnings.
The display is switched when two GL/2 warnings below occur.
• Warnings when the printer's parameter setting specification does not support the parameter settings of
created HP-GL/2 data
• HP-GL/2 warning commands when the printer does not support the created HP-GL/2 data
Select this setting item from Device settings > Print settings > HP-GL/2 print settings > Processing
options.
Note
• Warning is always displayed when one of the errors below occurs regardless of the setting.
• When virtual GL/2 memory exceeds acceptable level
• When GL/2 display list memory is insufficient
• When the number of polygon vertexes which GL/2 data has exceeds acceptable level
• Warning is always displayed on the status monitor or Remote UI regardless of the setting.
• Disable (Initial setting)
Does not display specific GL/2 warning on the touch screen.
• Enable
Displays specific GL/2 warning on the touch screen.
259