Canon TX-2000 Online Manual page 150

Note
• For the winding direction of the roll paper, you can select either outward winding to make the
printed surface on the outside of the roll or inward winding to make the printed surface on the
inside of the roll.
11. Follow these steps to secure the leading edge of the roll paper to the paper core with tape.
• If message appears on touch screen to confirm whether or not to advance paper
automatically so it can be secured with tape
1. Tap Yes.
The leading edge of the roll paper advances until it is close to the roll unit.
2. Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right
edge and tape center to paper core while pulling on roll paper evenly.
◦ Outward Winding
◦ Inward Winding
150