ZyXEL Communications GS2210-8 User Manual page 302

Chapter 33 Link Layer Discovery Protocol (LLDP)
Figure 210 Advanced Applicat ion > LLDP > LLDP Configurat ion> Org- specific TLV Set t ing
The following t able describes t he labels in t his screen.
Table 144 Advanced Applicat ion > LLDP > LLDP Configurat ion > Org- specific TLV Set t ing
LABEL DESCRIPTION
Port This displays t he Swit ch's port num ber.
* Use t his row t o m ake t he set t ing t he sam e for all port s. Use t his row first and t hen m ake
adj ust m ent s t o each port if necessary.
Changes in t his row are copied t o all t he port s as soon as you m ake t hem .
Dot 1 TLV
Port- Prot ocol Select t he check box( es) t o enable or disable t he sending of I EEE 802.1 Port and Prot ocol
VLAN I D
VLAN I D TLVs on t he port ( s) .
Port VLAN I D Select t he check box( es) t o enable or disable t he sending of I EEE 802.1 Port VLAN I D
TLVs on t he port ( s) . All check boxes in t his colum n are enabled by default .
Dot 3 TLV
Link Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 Link Aggregat ion
Aggregat ion
TLVs on t he port ( s) .
MAC/ PHY Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 MAC/ PHY
Configurat ion/ St at us TLVs on t he port ( s) . All check boxes in t his colum n are enabled by
default .
Max Fram e Select t he check box( es) t o enable or disable t he sending of I EEE 802.3 Max Fram e Size
Size
TLVs on t he port ( s) .
GS2210 Series User's Guide
302