Figure 110 Advanced Applicat ion > Link Aggregat ion > Link Aggregat ion Set t ing
The following t able describes t he labels in t his screen.
Table 62 Advanced Applicat ion > Link Aggregat ion > Link Aggregat ion Set t ing
LABEL
DESCRIPTION
Link
This is t he only screen you need t o configure t o enable st at ic link aggregat ion.
Aggregat ion
Set t ing
Group I D
The field ident ifies t he link aggregat ion group, t hat is, one logical link cont aining m ult iple
port s.
Act ive
Select t his opt ion t o act ivat e a t runk group.
Chapter 17 Link Aggregation
GS2210 Series User's Guide
152