Specifying The Com Port - Emerson Rosemount Apex Reference Manual

™
APEX and APEX Sentry

Specifying the COM Port

Figure 3-17. HART Server Icon
Figure 3-18. Rosemount HART
Communication Software
Figure 3-19. RCT tool bar
3-26
™
Radar Gauge
If communication is not established, open the HART Communication Server
window and verify the right COM Port is selected.
To check the current COM port settings do the following:
1. Locate the HART Server icon in the lower right corner of the screen.
2. Double-click the HART Server icon.
Check that the
selected COM port
matches the
connected port on
the PC.
3. Check the COM port.
4. Choose the COM Port option that matches the COM Port connected to
the transmitter.
5. Click the Search for a device icon in the RCT tool bar:
Search for a device
HART Server Icon
Reference Manual
00809-0100-4731, Rev FA
April 2003