Inlet Pipes Or Flows - Emerson Rosemount Apex Reference Manual

™
APEX and APEX Sentry
Figure 2-4. Example of off
center tank installation.
Specific Tank Shapes
Figure 2-5. Spherical vessel
installation
2-10
™
Radar Gauge

Inlet Pipes or Flows

The level reading may be affected by the process flowing into the vessel. To
lessen the effects, mount the radar gauge so the beam signal does not
contact the inlet pipe or flow (Figure 2-2).
Center of tank installations should be avoided, off-center installations are
preferred (Figure 2-4).
NOTE
Center of the tank installations should be avoided.
Spherical Vessel Considerations
NOTE
Spheres should never have top-center installation options.
Reference Manual
00809-0100-4731, Rev FA
April 2003