5.
Use the numerical keys to enter an ID and press the ENT key.
Press the SF and the BS/C key to change the entry mode (numerical entry (no guidance display) and
alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([3]) to highlight [3: ANONYMOUS ID] and then
press the ENT key.
The mode changes to entry mode and the cursor is displayed.
7.
Use the numerical keys to enter an ID and press the ENT key.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
8.
Use the cursor keys ([▲] [▼]) or numerical key ([4]) to highlight [4: PASSWORD] and then press
the ENT key.
The mode changes to entry mode and the cursor is displayed.
9.
Use the numerical keys to enter a password and press the ENT key.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
10.
Use the cursor keys ([▲] [▼]) or numerical key ([5]) to
highlight [5: ROOT CERT] and then press the ENT key.
The screen on the right is displayed.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message is displayed if no files exist.
11.
Use the cursor keys ([▲] [▼]) or numerical key ([6]) to
highlight [6: CLIENT CERT] and then press the ENT key.
The same screen as that for [5: ROOT CERT] is displayed.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message is displayed if no files exist.
12.
Press and hold the BS/C key to return to the SECURITY CONFIG menu.
Barcode Handy Terminal
161