[9] Setting the user program execution option
Use the following procedure to set the user program execution option.
1.
Select "1: EXEC PROG OPTION" at the SET SYSTEM 2/2 menu
and then press the ENT key.
The EXEC PROG OPTION screen appears.
The highlighted settings are the current settings.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to change
the setting and then press the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1: RESUME":
"ON":
Enables the resume function.
"OFF":
Disables the resume function.
"2: RESTART DIALOG":
Sets the presence of the confirmation screen when the auto-start
execution program is re-launched. For the function where the
auto-start execution program is re-launched, refer to "4.3.6
Executing the Auto-start Execution Program from the Point of
Start-up".
"ON":
The confirmation screen is displayed.
"OFF":
The confirmation screen is not displayed.
The resume function is used to return the BHT to the status (screen) when the BHT power
Note
was turned OFF previously.
Barcode Handy Terminal
SET SYSTEM
1:EXEC PROG OPT
2:DRIVE TOOL
3:OPERATION LOG
4:IME
[◀] BACK
E X E C P R O G O P T I O N
1 : R E S U M E
2 : R E S T A R T D I A L O G
2/2
O N O F F
O N O F F
117