1.
Perform the settings for the master-side clone using "1: CLONE" and "3:OPTION" from the
SETUP menu.
Use the "OPTION" menu to perform settings such as the clone number, and authentication key.
"OPTION" menu content is as per the table below.
Item
1: CLONE NO.
1 to 6-digit numeric values
2: SOFTWAVE TO
OS
CLONE
Used
0
alphanumeric characters
3: AUTH KEY
(Entry
mode.)
Not used
Clone menu
4: SLAVE ACTION
BHT reboot
Clone mode
Makes the slave-side file
structure identical to the
master-side structure.
5: FILE COPY MODE
HT-HT copy mode
Leaves a copy of the
slave-side files.
2.
Select "1: MASTER" from the CLONE MENU on the msaster side.
3.
Select "2: SLAVE" from the CLONE MENU on the slave side.
Setting Content
to
16
one-byte
possible
in
ALP
Master Side
Barcode Handy Terminal
Default
Differentiates whether or not the beginning
of the number is padded with a "0" so that
the not only sequential numbers, but date
"0"
settings can be performed as well.
Ex.:
The
between "1" and "000001".
There are also OS settings and additional
YES
files, but the aforementioned items are
always cloned.
Not used
BHT reboot: Restarts the BHT, then starts
Clone menu
the applications.
Clone mode
Slave Side
Remarks
function
differentiates
61