About “$$Brklst.sys”; Contents Of The “$$Brklst.sys” File; If Broken Files Are Found - Denso BHT-1306BWB User Manual

About "$$BRKLST.SYS"
If Scandisk finds a broken file(s), it will automatically create the "$$BRKLST.SYS" file.
To check the contents of the file, upload the file in System Mode to the host computer. (Refer to Chapter 4
"System Operation" – 4.5.3 "Uploading Files (UPLOAD MENU).")
Contents of the "$$BRKLST.SYS" file
Records (1) File name
(2) Error factor
(3) Broken records
[Ex.]
SAMPLE1.DAT + 01000-01050
SAMPLE1.DAT + 01200-01250
SAMPLE1.DAT + 01600-01650
SAMPLE2.DAT * 00250-00275
SAMPLE3.DAT * 00100-00150
↑ ↑
(1) (2)

2.6.5 If Broken Files Are Found

Even broken files can be uploaded, so upload them to the host computer according to your needs.
After uploading,
 Delete those broken files.
(Refer to Chapter 4 "System Operation" – 4.5.13 "Deleting Program/Data Files (DELETE FILE
MENU).")
 Download valid files having the same names as the broken ones.
(Refer to Chapter 4 "System Operation" – 4.5.3 "Downloading Files (DOWNLOAD MENU).")
+ (Broken since the BHT has not been turned off normally)
* (Broken due to any other causes)
e.g. 01000-01200 (Data in records numbered 1000 to 1200 is lost)
If more than one sequence of records is broken in a
same file, they will be written into the subsequent
records in the "$$BRKLST.SYS."
↑
(3)
Barcode Handy Terminal
27