Wireless Security Wpa2-1X Mode - Denso BHT-1306BWB User Manual

BHT-1300B series

Wireless Security WPA2-1x Mode


EAP authentication and an encryption system can be used with wireless security WPA2-1x mode.
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right is displayed.
[1: AUTH PARAM (EAP)]:
[2: WPA CIPHER]:
Press and hold the BS/C key to return to the SET SECURITY menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (EAP)] and then press the ENT key.
The screen on the right is displayed.
[1: EAP TYPE]:
[2: IDENTITY]:
[3: ANONYMOUS ID]: Anonymous ID
[4: PASSWORD]:
[5: ROOT CERT]:
[6: CLIENT CERT]:
3.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
EAP TYPE], and then use the cursor keys ([◄] [►]) to select PEAP
or EAP-TLS.
If PEAP is selected, a root certificate is used.
If EAP-TLS is selected, a root certificate and client certificate are used.
4.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
IDENTITY] and then press the ENT key.
The mode changes to entry mode and the cursor is displayed.
5.
Use the numerical keys to enter an ID and press the ENT key.
Press the SF key to change the entry mode (numerical entry (no guidance
display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key
simultaneously.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([3]) to highlight [3: ANONYMOUS ID] and then
press the ENT key.
The mode changes to entry mode and the cursor is displayed.
166
EAP authentication parameter setting
Encryption system setting
Selects PEAP or EAP-TLS.
ID
Password
Root certificate
Client certificate
[▲] key / [▼] key