Wireless Parameter Initialization; Eap Authentication Option Setting - Denso BHT-1306BWB User Manual



Wireless Parameter Initialization

1.
Select "3: INITIALIZE" at the SET RF PARAMETER menu and
then press the ENT key.
The screen on the right is displayed.
To initialize wireless parameters:
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes]
and then press the ENT key.
Wireless parameters are initialized and the screen returns to the SET RF
PARAMETER menu.
To cancel:
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: No] and
then press the ENT key.
The screen returns to the SET RF PARAMETER menu.


EAP Authentication Option Setting

This setting can be used when the mode is set to other than "1: None" at the SET SECURITY MODE
menu.
1.
Press the SF key and dot key at the SECURITY CONFIG menu.
The screen on the right is displayed.
[1: EAP START]: EAP authentication start time
[2: authPeriod]: Retry interval when there is no response
[3: helpPeriod]: Retry interval when authentication fails
[4: startPeriod]: Start retry interval
[5: maxStart]: Start retry count
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5])
to highlight the item to be set and press the ENT key.
The mode changes to entry mode and the cursor is displayed.
3.
Enter each item with the numerical keys and press the ENT key.
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key,
or press the SF key and BS/C key simultaneously.
4.
Press and keep the BS/C key to return to the the SECURITY CONFIG menu.
Barcode Handy Terminal
169