Wireless Security Settings; Wireless Security Mode Settings - Denso BHT-1306BWB User Manual

BHT-1300B series
Refer to Chapter 5 "Communication" – 5.2 "Wireless Communication" for details of the above setting
items.


Wireless Security Settings

1.
Select "2: SECURITY" at the SET RF PARAMETER menu and
then press the ENT key.
The screen on the right is displayed.
[1:SECURITY MODE]:
[2:CONFIGURATION]:
Refer to the following section for details of the above items.
Press and hold the BS/C key to return to the SET RF PARAMETER
screen.


Wireless Security Mode Settings

1.
Select "1: SECURITY MODE" at the SET SECURITY menu and
then press the ENT key.
The screen on the right is displayed.
The highlighted setting is the current setting.
[1: None]:
[2: 1x Supplicant]:
[3: WPA-1x]:
[4: WPA-PSK]:
[5: WPA2-1x]:
[6: WPA2-PSK]:
2.
To change the settings, use the cursor keys ([▲] [▼]) or numerical
keys ([1] [2] [3] [4] [5] [6]) to highlight each setting value.
3.
Press the ENT key or BS/C key to return to the SET SECURITY menu.
156
Sets up the wireless security mode.
Sets up the wireless security parameters.
None mode
1x Supplicant mode
WPA 1x mode
WPA-PSK mode
WPA2-1x mode
WPA2-PSK mode