Updating The Cu-1311 System; When Displayed File Name Differs From The Cu-1311 System Update File - Denso BHT-1306BWB User Manual

BHT-1300B series

[2] Updating the CU-1311 system

Update the CU-1311 system after downloading the CU-1311 system update file.
(Refer to Chapter 4.2.2 "CU-1311 System Update" for details.)
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight
[2: CU-F/W MODIFY] and then press the ENT key.
The CU-F/W MODIFY menu screen on the right is displayed.
[1: DO IT]:
Updates the CU-1311 system.
[2: FILENAME]:
Displays the filename to be used for updating the CU-1311 system.
Press and hold the BS/C key to return
menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1: DO IT] and then press the ENT key.
The CU-1311 system is updated.
The screen on the right is displayed upon completion of the update.
Press and hold the BS/C key to return to the CU-F/W MODIFY menu.

When the Displayed File Name Differs from the CU-1311 System Update File
If the name of the file displayed at [2: FILENAME] differs from the name of the CU-1311 system update file
to be used for updating the system, enter the correct file name.
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENAME] and then press
the ENT key.
The mode changes to entry mode and the cursor is displayed.
2.
Use the numerical keys and dot key to enter the correct file name.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry, press and hold the BS/C key,
or press the SF key and BS/C key simultaneously.
3.
Press the ENT key to set the entered file name.
204
to the SYSTEM PARAMETER