BHT-1300B Series
1.1 System Configuration
This section describes the hardware and software required for the code data collection system using the BHT.
1.1.1 Hardware Configuration
In addition to the BHT, the following hardware and software are required for the code data collection
system using the BHT.
Please note that certain components of the required hardware will differ depending on the type of
communication used.
Host computer
CU-1300 Series (option): Optical communication unit
Connection cable (option): Used to connect the CU and host computer.
Wireless LAN access point (option)
Bluetooth
®
®
Bluetooth
printer (Option)
(1) Infrared communication
IrDA printer (Option)
● Devices required for system configuration
(1) Infrared communication
(2) USB communication
(3)
Wireless LAN
communication
®
(4)
Bluetooth
wireless
communication
(5) Cradle communication
* When the host computer is equipped with the Bluetooth
2
compatible device (option)
BHT
®
(4) Bluetooth
wireless
communication
CU (Option)
Host
BHT
computer
–
*
(3) WirelessLAN
communication
(4) Bluetooth
(2) USB communication
(5) Cradle
communication
Connection cable
(Option)
Wireless LAN
Bluetooth® / /Irda
CU
access point
compatible device
–
–
–
–
–
–
–
–
®
wireless communication device.
Wireless LAN
access point
(Option)
®
wireless
conmunication
Host computer
(Option)
Ref. Page
Page 37
–
Page 38
–
Page 39
Page 40
Page 38
–