Transmitting Data; Infrared Communication; Communication Between The Two Bhts; Communication Between The Bht And The Irda Printer - Denso BHT-1306BWB User Manual

3.5 Transmitting Data

Data collected by the BHT can be transmitted to the host computer by infrared communication, wireless
communication and Bluetooth® wireless communication.
The data transmission method and BHT setting method will differ depending on the system used. For more
information on the operation, contact your system administrator.
Request
Data collected by the BHT should be promptly uploaded to the host computer.
3.5.1

Infrared Communication

 Communication between the two BHTs
Set the IrDA ports of the two BHT in the face-to-face position.
 Communication between the BHT and the IrDA printer
Set the IrDA port of the BHT and that of the IrDA printer in the face-to-face position.
Requests

Ensure that the light path between the BHT and any target stations is not obstructed.

Perform communication within the effective infrared emission range (15 cm).

Do not operate remote control units for televisions and so forth in the vicinity of infrared communication.
This may result in comunication failure.

Perform communication in locations where the BHT units will not be exposed to light interference from
sources such as intense ambient lighting (inverter-driven fluorescent lighting, in particular) or direct
sunlight. This may result in comunication failure.
Barcode Handy
IrDA printer
37