Setting Value Selection
Use the following procedure to select setting values.
1.
Press the numerical key corresponding to the item to be selected.
Alternatively, press the cursor keys ([▲] [▼]) to select the item.
The selected item will be highlighted.
2.
Select the setting value with the cursor keys ([◄] [►]).
3.
Press the ENT key.
The selected setting value will be set.
.
Barcode Handy Terminal
Operation example
Select the setting item with
the [2] key or [◄] [►] keys.
Select the setting value with
the cursor keys ([◄] [►]).
ENT key
53