Connection Conditions - Siemens SINUMERIK 810DE powerline Equipment Manual

Connection Conditions

2.1 Supplementary electrical conditions
Compliance with
The controller is tested for compliance with the ambient conditions specified
the connection below. Fault-free operation is only ensured if:
conditions
S
S
S
Danger
!
The equipment may not be commissioned until it has been clearly identified
that the machine in which the controller is installed is in full conformance with
the specifications in EC Machinery Directive 98/37/EC.
Assistance and The connection conditions must be carefully maintained for the complete
support system. Please contact your local Siemens office or representative for any
assistance.
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
These environmental conditions are maintained when storing, transporting
and operating the equipment.
Original components and spare parts are used. This applies in particular to
the use of specified cables and plug connectors.
The equipment has been correctly mounted/installed.
2
2-23