Axis Expansion With Simodrive 611D Control Plug-In Unit - Siemens SINUMERIK 810DE powerline Equipment Manual

5 Axis Expansion

5.2 Axis expansion with SIMODRIVE 611D control plug-in unit

5.2 Axis expansion with SIMODRIVE 611D control plug-in
unit
Application
Axis expansion with SIMODRIVE 611D control plug-in unit is only used if the
number of measuring channels of the SINUMERIK 810D is insufficient, or
higher performance is required.
Mounting
The SIMODRIVE 611D module must be inserted as the first module to the right
of the SINUMERIK 810D. If DC link busbars are connected, all screws must be
tightened firmly (comply with tightening torque, see figure 3-4).
Connection
A special set of cables is required to connect the SIMODRIVE 611D control
module. This cable set contains the connection with the drive bus and another
device bus cable.
Fig. 5-4
5-80
Cable set:
Device bus and drive bus
SIEMENS
SIMODRIVE
Power supply 810D
(I/R or OI) (CCU3)
Axis expansion for SINUMERIK 810D with the SIMODRIVE 611D module
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
611D control plug-in unit
LDC
Copyright © Siemens AG 2006