System Configuration - Siemens SINUMERIK 810DE powerline Equipment Manual

1 System Overview

1.2 System configuration

1.2 System configuration
Components
A fully equipped SINUMERIK 810D consists of different components. These are
listed below.
Table 1-2 Components of the 810D in the maximum configuration (without motors)
Component
Mains supply module See References:
(MS) /PJU/ Configuration
Manual Converters
SINUMERIK 810D
– CCU box 6FC5447-0AA00-0AA1
(3 axes)
6FC5447-0AA01-0AA0 6FC5447-0AA01-0AA0
– CCU box
(2 axes)
– CCU3.4 6FC5410-0AY03-1AA0
– CCU3 6FC5410-0AY03-0AA1
6FC5410-0AY03-0AA2
1)
Operator panel front
1)
PCU 20/50/70
1)
Machine control panel
1)
ISA adapter
1)
Full CNC keyboard
Memory card (PCMCIA)
1)
Floppy disk unit
Cable distributor 6FX2006-1BA02
Cable
Axis expansion 6FC5412-0FA12-0AA0
plug-in unit left
Axis expansion 6FC5412-0FA10-0AA0
plug-in unit
SIMATIC
components
Single I/O module 6FC5411-0AA00-0AA0
1)
6FC5211-0AA00-0AA0
NCU terminal block
1)
Handheld unit 6FX2007-1AC..
1-12
MLFB
Power supply module for powering the electronics and drives.
Either unstabilized (OI 5 kW to 28 kW) or stablized as infeed/rege-
nerative feedback module (I/R module) as from 16 kW to 120 kW;
optional filter modules.
Module racks for CCU integrated power modules: 1 x 18/36A
(FSD) or 24/32A (MSD) and 2 x 6/12A (FSD), internal heat
dissipation only dissipation only
Module rack for the CCU integrated power modules: 2 x 9/18/A
(FSD), internal/external heat dissipation
like CCU3 but with PLC 314C-2DP
CPU of the 810D contains:
NCK, PLC 315-2DP, communication functions, digital standard
control
Additional functions:
– 16 MB DRAM, 2.5 MB SRAM
– Handling with 6 axes
– 2nd channel with 6 axes
Display, keyboard and operation of the 810D
Makes communication between operator and machine possible
Operation of PLC-controlled machine functions of 810D
Permits use of AT modules in conjunction with the PCU
Full keyboard connectable to PCU
Slot for PCMCIA card on the CCU.
PCMCIA card for software update (not 810DE).
Built-in unit for connection to PCU
Connection of two handwheels and two probes to the CCU
References: Catalog NC Z
For installation in a SIMODRIVE 611 D power module (1-axis) for
axis expansion, place between I/R module and 810D
References: /PJU/, Configuration Manual Converters
For installation in a SIMODRIVE 611 power module (1-axis or
2-axis),
References: /PJU/, Configuration Manual Converters
See http://www.siemens.com/automation/simatic
PLC I/O module with 64 inputs and 32 short-circuit-proof outputs
Rapid digital and analog NC I/Os on the drive bus of the
SINUMERIK 810D
Handheld unit with handwheel, EMERGENCY STOP button, key-
switch, override, enabling buttons, display, free keys, connection
via MPI bus and cable distributor
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
Description
Copyright © Siemens AG 2006