Siemens SINUMERIK 810DE powerline Equipment Manual page 81

Table 5-1
Installation
1. Bring in and connect the ribbon cable for connector X301 through the slot in
2. If applicable, also attach the ribbon cable for connector X302 accordingly
Fig. 5-3
3. After plugging in the axis expansion plug-in unit and connecting to the CCU,
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
Connection of the ribbon cable connector to the axis expansion plug-in
unit
Ribbon cable connector
X301
X302
the front panel with the notch facing forward.
(for 2nd axis).
X302
X301
Ribbon cable
Connection of the ribbon cables to the axis expansion
you should push the excess cable length in the space provided for that pur-
pose under the sheet-metal cover of the axis expansion plug-in unit.
5.1 Axis expansion plug-in unit
1-axis power module 2-axis power module
1st axis
Unassigned
Front panel
Notch
301 302
Sheet-metal cover Axis expansion plug-in unit
5 Axis Expansion
1st axis
2nd axis
5-79