Description - Siemens SINUMERIK 810DE powerline Equipment Manual

Description of the SINUMERIK 810D
4.1 Components of the SINUMERIK 810D
4.1.1 Overview
The structure of the SINUMERIK 810D is compatible with the SIMODRIVE 611
digital module series. The SINUMERIK 810D is operated with the SIMODRIVE
611 power supply modules (OI or I/R modules).
3-axis CCU box
Basic housing with fans for fitting the CCU module with three integrated power
modules 1x18A/36A (FSD) or 24A/32A (MSD) and 2x6A/12A (FSD) and slot for
CCU module (internal heat dissipation).
2-axis CCU box Basic housing with fan for fitting the CCU module with two integrated power
modules 9A/18A (FSD) and slot for CCU module (internal and external heat
dissipation).
CCU
The CCU module (Compact Control Unit) of the SINUMERIK 810D performs all
CNC, PLC, communication, and closed-loop control tasks. The CCU has 6
module
measuring channels. Each drive requires one measuring channel for the motor
measuring system. If measuring channels of the basic unit are left over, they
can be assigned freely as direct measuring channels, e.g. for the spindle.
Additional measuring channels are obtained by using a 611D closed-loop con-
trol module (1- or 2-axis control module) with or without a direct measuring
system (DMS). The 611D closed-loop control module performs closed-loop con-
trol of the drive. The unused measuring channels can be freely assigned.
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
4
4-47