Siemens SINUMERIK 810DE powerline Equipment Manual page 41

SIEMENS
SIMODRIVE
Power supply
(I/R or OI)
Fig. 3-2 Overall assembly SINUMERIK 810D with SIMODRIVE 611 power module
Installation of the
Sequence:
CCU
1. Connect the battery on the CCU module
2. Insert and fix the CCU module into the guide rails of the CCU box
To be able to ensure compliance with the EMC conditions and resistance to
vibrations, it is necessary to tighten the slot-head screws (1) (see figure 3-3).
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
3 Design and Installation of the 810D
3.2 Assembly of the SINUMERIK 810D
Axis expansion plug-in unit, left
810D
LDC
(CCU3)
Axis expansion
plug-in unit
LDC
3-39