Siemens SINUMERIK 810DE powerline Equipment Manual page 79

Axis Expansion
5.1 Axis expansion plug-in unit
Application
The axis expansion plug-in unit is installed in a SIMODRIVE 611 power mo-
dule and then connected to the X304-X306 axis expansion terminal of the
SINUMERIK 810D. The plug-in unit is designed for 1-axis and 2-axis power
modules.
There is also an axis expansion plug-in unit left with terminals for connectors
X307 (CCU) und X301 (expansion plug-in unit) at the same height.
SIEMENS
SIMODRIVE
Power supply
(I/R or OI)
Fig. 5-1
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
Axis expansion plug-in unit, left
810D
LDC
(CCU3)
Axis expansion plug-in unit, left and right, for the SINUMERIK 810D with
SIMODRIVE 611 power modules
5
Axis expansion
plug-in unit
LDC
5-77