Dell PowerEdge FX2 Deployment Manual page 77

Configuring, testing and validating vlt on a pair of fn410s i/o modules in a poweredge fx2 chassis (v2.2)
Hide thumbs Also See for PowerEdge FX2:
Table of Contents

Advertisement

Figure 51 shows that the Dell Networking architecture for mVLT is very similar to this brand-varied
Multi-Chassis Link Aggregation Group (MC-LAG) architecture.
FC630 Server
The configuration steps outlined below are repeated on both Nexus switches. When validating the
configurations in this guide the following management IP addresses (Table 13) were used.
Hostname
Nx5672-1
Nx5672-2
PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
77
VLT Domain
FN IOM
VLTi
FN IOM
Cisco vPC – Dell Networking VLT – multi-vendor same port channels
IP Addresses
IP Address
172.25.109.37
172.25.109.24
vPC Domain
Nexus 5000
Peer Link
Nexus 5000
Subnet
255.255.0.0
255.255.0.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fn410s

Table of Contents