Configuring the VLT participating links
PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
36
FN410S- A1
Configure the VLTi port channel
interface
Add a description
Add channel members
interface port-channel 127
description VLTI link to
VLT- Switch A2
channel-member te0/9 – 10
no switchport
no shutdown
exit
Configure the VLT domain
Set peer link port channel of Switch
A2
Configure the backup destination
management IP (management IP of
the other switch)
Set unit id
vlt domain 1
peer-link port-channel
127
back-up destination
172.25.189.28
unit-id 0
exit
FN410S- A2
Configure the VLTi port
channel interface
Add a description
Add channel members
interface port-channel
127
description VLTI
link to VLT- Switch A1
channel-member te0/9 –
10
no switchport
no shutdown
exit
Configure the VLT domain
Set peer link port channel of
Switch A1
Configure the backup
destination management IP
(management IP of the other
switch)
Set unit id
vlt domain 1
peer-link port-
channel 127
back-up destination
172.25.189.27
unit-id 1
exit