A References - Dell PowerEdge FX2 Deployment Manual

Configuring, testing and validating vlt on a pair of fn410s i/o modules in a poweredge fx2 chassis (v2.2)
Hide thumbs Also See for PowerEdge FX2:
Table of Contents

Advertisement

A
References
Alexis Dacquay. (2012). Virtual Link Trunking Overview. Retrieved from www.dell.com:
http://i.dell.com/sites/content/business/large-
business/merchandizing/en/Documents/Dell_Force10_S4810_VLT_Technical_Guide.pdf?forcedownlo
ad=truehttp://www.dell.com/learn/us/en/04/shared-content~data-
sheets~en/documents~dell_force10_s4810_vlt_technical_guide.pdf
Cisco Inc. (n.d.). Cisco NX-OS Software Virtual PortChannel: Fundamental Concepts 5.0. Retrieved
from Cisco.com:
switches/design_guide_c07-625857.html
B
Components
The following table (Table 16) presents the versions of the hardware and software components used
to configure and validate the solutions provided in this guide.
Component
FN IOMs
PowerEdge FN410S
Switches
Dell Networking S4810
Cisco Nexus 5672UP
Servers
Dell PowerEdge FC630
Dell PowerEdge FC430
Network Adapters
QLogic BCM57810
Operating Systems
Windows 2012 R2
PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
90
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-
Hardware and software components
Version
Dell Networking OS 9.10(0.1)
Dell Networking OS 9.10(0.0)
Cisco NX-OS 7.3(0)N1(1)
System BIOS 2.1.7
System BIOS 2.1.5
Firmware Revision 7.12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fn410s

Table of Contents